หยุดปัญหามอเตอร์ไหม้ เลือกใช้
Motor Protection Relays
นิยามใหม่ Over load
คุณสมบัติพิเศษ
• มีดิจิตอลมิเตอร์ในตัว
• ใช้ได้กับมอเตอร์ทุกขนาด
• มีฟังก์ชันเตือนก่อน Overload
• มีฟังก์ชันทดสอบการทำงาน
• แสดงสาเหตุการ Trip พร้อมบันทึก ค่าสุดท้าย | |
|
 |
 |
 |
 |
Digital Electronic Over-Current Relay with ammeter
ดิจิตอลโอเวอร์โหลด เพื่อป้องกันมอเตอร์ไหม้
พร้อม Digital แอมป์มิเตอร์ และการป้องกันแบบปรับแต่งค่าได้
Model: SSD-05
Digital Protection 0.5-6A, 2CT, Coil 100-240VAC/DC

Model: SSD-30
Digital Protection 3-30A, 2CT, Coil 100-240VAC/DC

Model: SSD-60
Digital Protection 10-60A, 2CT, Coil 100-240VAC/DC

|
|
Electronic Over Current Relay (EOCR)
► EOCR-SSD
► Microprocessor Control Unit Based/2-CT Type
► Real Time Processing/Higher Precession
► Current Setting Range
05Type:0.5~6A/30Type:3~30A/60Type:10~60A
► Indicating real current on the display
► Trip cause digital display for easy trouble shooting
► Reset:Manual(insta
ntaneous)/Electrica
l(remote)
► Load selection by
DIP switch: Single phase(1P)/Three phase(3P)
► Fail-safe(N)/Non-Fail-safe(R)
♦ Protection
Over-current : Trip time o sec Is
Phase Loss : Trip time 3 sec
Locked Rotor : Trip time 0.5sec after elapse of dt
>2times OC setting value |
 |
 |
 |
EOCR-IFDM

- Digital Protection 0.5 - 80A,3CT, 100-240VAC/DC
- Panel Mounting Type
- Cable Link: 2-3 m.
- Communication Function
|
|
New Digital / i-Series (i3DM, iFDM)
- Integrated model, Improved functions
- Integrated model, Improved functions
- Modbus RS-485 Communication
- RoHS Compliant
- Support thermal inverse protection
• Micro-Controller Unit based
• Real-time processing / High precision
• Protections: Over current, Under current, Phase loss, Phase reversal, Stall, Jam,
Current imbalance, Earth fault (i3MZ/iFMZ), Short circuit (i3MS/iFMS)
• Thermal protection / Inverse available up to 32Amps without external CTs.
• Auxiliary functions : Fail safe, Pre-alarm (i3DM/iFDM), Accumulated running hour, 3
fault records & limitation of auto-restart. Analog output (i3M420/iFM420).
• Communication: Modbus / RS-485
• Reinforced monitoring function: Monitoring distance up to 400M, 3-phase current
display, Pre-alarm (i3DM/iFDM) & Trip cause indication
• Bar graph indicating the load current to the current setting.
• Available application on single and 3-phase motor
• RoHS Compliance
• For iFDM/iFMZ/iFMS/iFM420, normal protections are guaranteed even if PDM is
disconnected.
|
EOCR-3DM2
- Digital Protection 0.5-60A, 3CT, 100-240VAC/DC
|
|
EOCR-3DM2
- Digital type 3DM, FDM
- The first multi-function digital relay.
- Display trip causes and load factor.
- Ground fault protection (Earth leakage current display)
- Registered as a new power technology No.5. (Ministry of Commerce, Industry, and Energy)
- Integrated components (Ammeter, Transducer, A/S switch, Timer, etc.)
► Protection
- Overload, In > Overcurrent setting
- Underload, In < undercurrent setting
- Locked during start-up, In > overcurrent setting in multiples of 2...8
- Locked during operation, In > 1.5...5 multiple overcurrent settings
- loss of vision
- Unbalanced, 10...50 %
- reverse image
|
- Digital Protection 0.5 - 80A,3CT, Coil 100-240VAC/DC
- Panel Mounting Type
- Cable Link : 2.3 m.
- 4-20 mA loop current
- Communication function
|
|
EOCR-IFM420
General features
- Microcontroller Unit-based
- Real-time processing / High precision
- Protections: Over current, Under current, Phase loss, Phase reversal, Stall, Jam, Current imbalance,
Earth fault (i3MZ/iFMZ), Short circuit (i3MS/iFMS)
- Thermal protection / Inverse available up to 32Amps without external CTs.
- Auxiliary functions: Fail-safe, accumulated running hour, 3 fault records & limitation of auto-restart.
- Analog output
- Communication: Modbus / RS-485
- Reinforced monitoring function: Monitoring distance up to 400M, 3-phase current display, & Trip cause indication
- Bar graph indicating the load current to the current setting.
- Available applications for single and 3-phase motors
- RoHS Compliance
- Normal protections are guaranteed even if PDM is disconnected.
► Protection
- Overload, In > Overcurrent setting
- Underload, In < undercurrent setting
- Locked during start-up, In > overcurrent setting in multiples of 2...8
- Locked during operation, In > 1.5...5 multiple overcurrent settings
- loss of vision
- Unbalanced, 10...50 %
- reverse image |
- Digital Protection 0.5 - 80A,3CT, Coil 100-240VAC/DC (11-960A With External CT) Ground Fault
- Panel Mounting Type
- Cable Link : 2.3 m.
- Communication function
|
|
EOCR-IFMZ
General features
- Microcontroller Unit-based
- Real-time processing/High precision
- Protections: Overcurrent, Undercurrent, Phaseloss, Phasereversal, Stall, Jam,
Current Unbalance, Earth fault
- Thermal protection/Inverse available up to 32Amps without external CTs.
- Auxiliary functions: Failsafe, accumulated running hour, 3 fault records &
limitation of auto-restart.
- Communication: Modbus/RS-485
- Reinforced monitoring function: Monitoring distance up to 400M, 3-phase
current display, Trip cause indication
- Bar graph indicating the load current to the current setting.
- Available applications for single and 3-phase motors.
- RoHS Compliance
- For iFMZ, normal protections are guaranteed even if PDM is disconnected.
► Protection
- Overload, In > Overcurrent setting
- Underload, In < undercurrent setting
- Locked during start-up, In > overcurrent setting in multiples of 2...8
- Locked during operation, In > 1.5...5 multiple overcurrent settings
- loss of vision
- Unbalanced, 10...50 %
- reverse image
|
EOCR-FDM2

- Digital Protection 0.5-80A, 3CT, Coil 100-240VAC/DC
- Panel Mounting Type
- Analog Output 4-20 mA
|
|
EOCR-3DM2
- Digital type 3DM, FDM
- The first multi-function digital relay.
- Display trip causes and load factor.
- Ground fault protection (Earth leakage current display)
- Registered as a new power technology No.5. (Ministry of Commerce, Industry,
and Energy)
- Integrated components (Ammeter, Transducer, A/S switch, Timer, etc.)
► Protection
- Overload, In > Overcurrent setting
- Underload, In < undercurrent setting
- Locked during start-up, In > overcurrent setting in multiples of 2...8
- Locked during operation, In > 1.5...5 multiple overcurrent settings
- loss of vision
- Unbalanced, 10...50 %
- reverse image |
- Digital Protection 0.5-80A, 3CT, Coil 100-240VAC/DC
- Ground Fault
- Analog Output 4-20 mA
|
|
EOCR-PMZ

Main Features
- The current system automatically displays 3-phase current and leakage current in circulation every 5 seconds
- Can be switched from auto circulation display mode to manual circulation mode with the touch of a button,
allowing focused display on a certain element (one specific phase out of 3 phases or leakage current)
- Contains the overcurrent/undercurrent/earth fault/current signal output function in a single EOCR
- Wide range of use: 0.1-3600A - wide range: 0.5-60A; for 5 holes: 0.1-2.0A; with the use of an external CT: 1-3600A
- Easily identifiable characters and numbers displaying trip causes
- The last trip causes are remembered up to the 3 most recent trip causes and the current one at the time of the trip, and checks the operation even during the recovery of electricity after a power outage
- Includes a timer function for checking total operation time and to provide a reminder of maintenance tasks, such as bearing replacement
- Has a bar graph that helps the manager to set the current level conveniently and to check the motor load factor
- Has a transducer function (4-20mA current signal output) for easy and focused management
- For the current operation characteristics, select from Definite, Inverse, and Thermal Inverse
- Earth fault Oeakage) current detection: zero-phase current detection method
- For the arth fault current operation characteristic, apply either Definite or Inverse
- Overcurrent Protection Characteristics
- Thermal Memory Protection ("th"): When Inverse is applied, the cumulative calculation value of the heat generated during the motor's operation is remembered to be protected directly by the hot curve instead of the cold curve. (Automatically resets 20 minutes after the motor stops)
- Non-thermal Memory Protection ("In"): When Inverse is applied, it is protected by the cold curve if the motor has started, and by the hot curve during normal operation
- Removable EOCR allows its use in the terminal type or the hole type (removable terminal strip)

|
|
|
Catalog & Price
|
| | |
|